This water bottling machine is washing-filling-capping 3-in-1unit. Water filling machine used to produce plastic bottled purified water, mineral water, drinking water and other non-gas beverages.
Water bottling line can finish all the process such as washing bottle, filling and sealing, water bottling equipment can reduce the materials with outside touch time, improve the sanitary conditions, production capacity and economic efficiency.
1.Into bottle way is air conveyor direct connection with Bottle dial
2.All 304/316 stainless steel rinse heads, water spray style inject design, more save water consumption and more clean
3.304/316 Stainless steel Gripper with plastic pad, ensure minimal bottle crash during washing
4.304/316 stainless steel washing pump make the machine more durable
Filling Part:
1.304/316 Stainless steel high precision filling nozzle
2.Filling volume adjustable in fine rank, same liquid level after filling
3.All 304/316 stainless steel contact parts & liquid tank, fine polish, no death corner, easy to clean
4.304/316 stainless steel filling pump
5.Efficient spray nozzle rinse thoroughly and save water for flushing
Capping Part:
1.Place and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping
2. All 304/316 stainless steel construction
3. No bottle no capping
4. Automatic stop when lack of bottle
5.Capping effect is stable and reliable ,Defective rate ≤0.2%
1. Water bottling machineis adopted that direct connection between air conveyor and inlet starwheel instead of screw and conveyor chains, which is easier for bottle changing.
2. There is no need to adjust the height of equipments through neck holding tech for bottle transportation. And what is only to change some spare parts.
3. High speed filling line is of clamp transferring technology. Bottle shapes are more varied, and the working table inside the machine is more laconic.
4. By 3-in-1 monoblock, the bottle goes through rinsing, filling and capping with little abrasion, and the transferring is stable, bottle changing is easier.
5. Specially designed stainless steel bottle clamp dose not contact the thread parts of the bottle neck, avoiding the second contamination.
6. High speed and large flow filling valve assures the high filling speed and exact fluid level…Parts contact with the liquid are all of excellent stainless steel or food level plastic.
7.The bottle-out starwheel is of screwdown shape. When bottle size is changed, there is no need to adjust the transferring chain’s height.
8. 3-in-1 monoblock water bottling machine is composed of rinser, filler, capper, frame, sealing window, main motor and transferring system, cap unscrambler and electric control system etc.
9. The overturning device of the rinser is mainly composed of water distributor, bottle clamp, up turnplate, guide rail, protection cover, spraying device, defrosting tray.
