Small Mineral Water Bottling Equipment Technical Structure Feature:
1. The mineral water bottling equipment is rotary type, mainly sued for rinsing new bottles send the bottles to the filling machine.
2. PET bottle enters the machine by bottle distribute wheel star, and turned with mouth down by clip and turn mechanism, after sterile water rinsing and drying, automatic turn with mouth up, and send to filling machine by bottle-outlet wheel star. The main structure with rinsing water and outer shield are all stainless steel material; open type gear drive.
3. Renew stainless steel clip, simple structure, convenient adjustment; small area touch with bottle mouth, avoid the secondary pollution for the bottle mouth efficiently.
4. Bottle rinsing machine equipped with water collector to callback rinsed water.
5. The consumptions of the water for each type of bottle when rinsing is 105ml/s (when 0.25Mpa)
6. Bottle neck locking and conveying: good to avoid bottle mouth be polluted.
7. Liquid level in the bottle can be controlled precision: because of the high-precision flow-meter.
8. Filling speed can be adjusted: it is easy for adjusting daily production according to different requirement.
9. The mineral water bottling machine adopt full 304 stainless steel valves, shell, food grade rubber parts: keep the health grade of the whole system.
1.Into bottle way is air conveyor direct connection with Bottle dial
2.All 304/316 stainless steel rinse heads, water spray style inject design, more save water consumption and more clean
3.304/316 Stainless steel Gripper with plastic pad, ensure minimal bottle crash during washing
4.304/316 stainless steel washing pump make the machine more durable
Filling Part:
1.304/316 Stainless steel high precision filling nozzle
2.Filling volume adjustable in fine rank, same liquid level after filling
3.All 304/316 stainless steel contact parts & liquid tank, fine polish, no death corner, easy to clean
4.304/316 stainless steel filling pump
5.Efficient spray nozzle rinse thoroughly and save water for flushing
Capping Part:
1.Place and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping
2. All 304/316 stainless steel construction
3. No bottle no capping
4. Automatic stop when lack of bottle
5.Capping effect is stable and reliable ,Defective rate ≤0.2%
