This liquor filling equipment is specially used for filling glass bottles of yellow wine, white wine, liquor and so on. The seal can be selected between the crown cap and the aluminum cap. Filling bottle lifting is carried out by mechanical lifting or cylinder lifting, and has a pre-covering device. The liquor filling machine has a complete CIP cleaning function.
Liquor Filling Machinee Detail:
Filling Part:
1.304/316 Stainless steel high precision filling nozzle
2.Filling volume adjustable in fine rank, same liquid level after filling
3.All 304/316 stainless steel contact parts & liquid tank, fine polish, no death corner, easy to clean
4.304/316 stainless steel filling pump
5.Efficient spray nozzle rinse thoroughly and save water for flushing
Capping Part:
1.Place and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping
2. All 304/316 stainless steel construction
3. No bottle no capping
4. Automatic stop when lack of bottle
5.Capping effect is stable and reliable ,Defective rate ≤0.2%
Liquor Filling Equipment Video:
Liquor Filling Equipment Features:
1. The liquor filling machine adopts special filling valve, high-power vacuum pump, and the liquid level is consistent after packaging and filling.
2. Sealing the bottle mouth during filling, the liquid flows down the bottle wall, effectively controlling the foam caused by liquid impact during filling and preventing liquid spillage.
3. the machine frequency control, filling speed is fast, with overload protection device, card bottle shutdown, soft start, use elastic bottle device to reduce bottle damage.
4. The filling quantity adjustment is convenient and quick by adjusting the gasket on the filling and filling valve.
5. The filling range of the machine is large, and the filling amount can be adjusted in 100-1500 ml.
6. The liquor filling equipment is suitable for a wide range of bottles and can be adjusted between 100-380 mm.
7. The main seals are made of imported silica gel, and the main parts are made of 304 stainless steel conforming to food hygiene.
8. The filling valve is easy to disassemble and easy to clean.
