Juice hot filling machine is used for filling fruit juice, tea drink into PET bottles. Chenyu Packing Machinery can supply the whole juice hot production line.
Juice hot filling machine is used for filling fruit juice, tea drink into PET bottles. Chenyu Packing Machinery can supply the whole juice hot production line. This juice filling machine adopts bottle neck holding transmission technology to realize fully automatic rinsing, filling and capping. Juice hot filling machine is equipped with perfect temperature control system, reverse-flow system, automatic cleaning system and control program.
1. The juice will be prepared by the juice preparation system, the prepared juice is stored in the insulation tank (for heat preservation) temporarily.
2. Automatic heat resistance PET bottle blow molding machine is connected with the water filling machine by the Air conveyor.
3. Prepared juice will be pumped into the juice filling machine; At the same time, empty bottles pass through the rinsing, filling and capping 3-in-1 monoblock juice filling machine, the bottles will be rinsed, filled and capped.
4. Bottled water goes out from the juice filling machine and will be transferred to the bottle over-turn sterilizing machine, the cap and the bottle mouth will be sterilized after passing through the sterilizing machine, then the bottles will be transferred to the bottle cooling machine.
5. The bottles are getting dried after passing through the blowing dryer, and the dried bottle will go to the labeling machine and PE film shrink wrapping machine.
6. The packed bottle juice will come out from the PE film shrink wrapping machine.
1.Into bottle way is air conveyor direct connection with Bottle dial
2.All 304/316 stainless steel rinse heads, water spray style inject design, more save water consumption and more clean
3.304/316 Stainless steel Gripper with plastic pad, ensure minimal bottle crash during washing
4.304/316 stainless steel washing pump make the machine more durable
1.304/316 Stainless steel high precision filling nozzle
2.Filling volume adjustable in fine rank, same liquid level after filling
3.All 304/316 stainless steel contact parts & liquid tank, fine polish, no death corner, easy to clean
4.304/316 stainless steel filling pump
5.Efficient spray nozzle rinse thoroughly and save water for flushing
1.Place and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping
2. All 304/316 stainless steel construction
3. No bottle no capping
4. Automatic stop when lack of bottle
5.Capping effect is stable and reliable ,Defective rate ≤0.2%
|Model||RCGF 8-8-4||RCGF 14-12-5||RCGF 16-16-5||RCGF 20-20-6||RCGF 24-24-8||RCGF 32-32-10||RCGF 40-40-12||RCGF 50-50-15|
|Filling precision||≤±5mm(Liquid level positioning)|
|Suitable bottle||Round or square shaped bottle|
|PET Bottle||Bottle Diameter:Ф50～Ф100 Bottle Height:150mm～330mm|
|Suitable Cap Standard||Plastic Screw Cap|
|Rinsing water pressure(MPa)||0.2～0.25|
|Rinsing water consumption(Kg/h)||500||600||700||800||1500||1800||2500||3000|
|Air source pressure(MPa)||0.4|
More complete juice hot filling machine HD video from YouTube