GCF18-18-6 Can Filling Machine for Juice / Tea Beverage
The can filling machine is mainly used for various juices, fruit teas, tea drinks, etc. The can filling machine has the advantages of advanced structure, stable and reliable work, safe operation and convenient maintenance, adopts frequency conversion speed regulation and high production efficiency.
GCF18-18-6 Can Filling Machine for Juice / Tea Beverage video
The can filling machine is mainly used for various juices, fruit teas, tea drinks, etc. The can filling machine has the advantages of advanced structure, stable and reliable work, safe operation and convenient maintenance, adopts frequency conversion speed regulation and high production efficiency, and is an ideal can filling device for small and medium-sized beverage factories.
Can filling machine is digestion and absorption of advanced foreign and domestic sealing machine on the basis of independent development of the can filling ,sealing unit. Filling and sealing is the overall designed,power system by filling sealing system to ensure that both the absolute synchronization and coordination.
The can filling machine has the characteristics of filling reposefully, high speed, liquid level control, capping reliably, frequency conversion timing, less material loss.
1. When can from in the center the star round enters a can-base of board, the filling valve taking the valve coat, the valve core is together up move, at this time 0 type roll 1 take off with the valve seat to open, enter the filling district.
2.The material continue downflow, until the bottle filling up ,when the rolls round to carry on the cam, the filling valve to move up,0 type circle 1compress tightly the valve body, make the material no longer enter the valve tube of the valve core.
1. The cap screwing machine is composed of frame, slide way, cap screwing device, transmission and others.
2. The transmission of the cap screwing machine is drive to the gear by the reduce, the power is transferred to the cap screwing head through the hollow main axle.
3. The can is not rotating, the four small rolls will rotate and press cap. The cam is fixed. The cap is sent into the gear ring of the screwing cap head through the stirring device and slide way. When there is a can on the convey belt, a cap will move down with the rotating of the screwing cap head and screw the cap on the can mouth.
|Overall dimensions (mm)||2320×1400×1900||2500×1600×1900|