Drinking water bottling machine’s circular bottle neck gripping and transmission method is adopted at the connection star wheel between washing unit,filling unit and capping unit. Water bottling machine used to produce plastic bottled purified water, mineral water, alcoholic beverages and other non-gas beverages.
Drinking water bottling machine can finish all the process such as washing bottle, filling and capping, water bottling equipment can reduce the materials with outside touch time, improve the sanitary conditions, production capacity and economic efficiency. Water bottling machine is a good option for the bottled drinking water factory.
More complete drinking water bottling machine HD video from YouTube
1.Into bottle way is air conveyor direct connection with Bottle dial
2.All 304/316 stainless steel rinse heads, water spray style inject design, more save water consumption and more clean
3.304/316 Stainless steel Gripper with plastic pad, ensure minimal bottle crash during washing
4.304/316 stainless steel washing pump make the machine more durable
1.304/316 Stainless steel high precision filling nozzle
2.Filling volume adjustable in fine rank, same liquid level after filling
3.All 304/316 stainless steel contact parts & liquid tank, fine polish, no death corner, easy to clean
4.304/316 stainless steel filling pump
5.Efficient spray nozzle rinse thoroughly and save water for flushing
1.Place and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping
2. All 304/316 stainless steel construction
3. No bottle no capping
4. Automatic stop when lack of bottle
5.Capping effect is stable and reliable ,Defective rate ≤0.2%
|Suitable bottle||Round or square shaped bottle|
|PET Bottle||Bottle Diameter:Ф50～Ф100 Bottle Height:150mm～330mm|
|Suitable Cap Standard||Plastic Screw Cap|
|Water Consumption of Rinsing(Kg/h)||500||600||700||800||1500||1800||2500||3000|
1. Drinking water bottling machine is adopted that direct connection between air conveyor and inlet starwheel instead of screw and conveyor chains, which is easier for bottle changing.
2. High speed filling line is of clamp transferring technology. Bottle shapes are more varied, and the working table inside the machine is more laconic.
3. By 3-in-1 monoblock water bottling machine, the bottle goes through rinsing, filling and capping with little abrasion, and the transferring is stable, bottle changing is easier.
4. High speed and large flow filling valve assures the high filling speed and exact fluid level…Parts contact with the liquid are all of excellent stainless steel or food level plastic.
5.The bottle-out starwheel is of screwdown shape. When bottle size is changed, there is no need to adjust the transferring chain’s height.