The unit is the core equipment for a 3 gallon, 5 gallon barreled water production line. It is an ideal equipment for the production of mineral water, distilled water and pure water. Made of high quality stainless steel, it is corrosion resistant and easy to clean.
The unit is the core equipment for a 3 gallon, 5 gallon barreled water production line. It is an ideal equipment for the production of mineral water, distilled water and pure water. Made of high quality stainless steel, it is corrosion resistant and easy to clean. The main electrical components are all MITSUBISHI and OMRON products, and the original pneumatic components are imported AIRTAC products. Both the inner and outer nozzles for washing the drums are made of imported American spray company’s unique technical equipment. The line equipment is compact in structure, high in work efficiency, stable and reliable, sensitive in action and high in automation. It is a fully automatic barreling machine with three-in-one machine.
The working principle of the barreled water production line is that the empty barrel moves with the chain to a working position, and the barrel body is flushed in an inverted state. The rinsing process has a total of eight processes, the first and second alkaline washing, the third drying, the fourth and fifth disinfecting liquid, the sixth drying, the seventh returning water cleaning, and the eighth drying, the ninth pure water washing, The tenth drop is dry, the eleventh pure water is rinsed, and the twelfth drop is dry (it can also be set according to user requirements).
The cleaned bucket of the barreled water production line is turned over 90 degrees with the movement of the chain. The empty bucket is pulled out of the bucket by the pulling cylinder and turned down with the bucket, and then the bucket is turned up by the push cylinder. The bucket is placed on the conveyor belt of the filling machine for filling.
After the disinfection of the empty barrel to the filling position, the filling valve is pushed by the cylinder into the barrel mouth, the filling pump is opened for filling, the filling time is set by the PLC, and the filling can be corrected by using the panel multi-function button according to the level of the liquid level. Time to reach the correct position. After the filling is completed, the full barrel is sent to the glanding station by the conveyor belt, and the bottle cap is automatically put on the barrel when the wearing position is passed. After the gland is completed, it is output through the conveyor chain and enters the post-packaging process.