PRODUCT CATEGORY
You are here: Home » Solution case » Daily Chemical Filling Mahcine » Auxiliary Packaging Machinery » Automatic PET Bottle Blow Moulding Machine
Automatic PET Bottle Blow Moulding Machine

Automatic blow molding machine for the manufacture of PET bottles as raw carbonated drinks, water bottles, juice bottles, cosmetic bottles and so on.

Product Description

Automatic PET Bottle Blow Moulding Machine

Automatic PET Bottle Blow Moulding Machine

Automatic blow molding machine for the manufacture of PET bottles as raw carbonated drinks, water bottles, juice bottles, cosmetic bottles and so on. This machine adopts man-machine interface to control all working procedures automatic embryo, automatic blower, automatic out of the bottle, the air cylinder fully installed magnetic sensor switch connected PLC controlling the entire program to detect each movement of the cylinder, place the next action tooling stroke , the trip is not in place under the protection of an automatic action is not working, the alarm, PLC display fault location.

Automatic PET Bottle Blow Moulding Machine

Machine movement speed, accurate positioning, smooth operation. Depending on the model required, using double crank to increase cross clamping, clamping power. Clamping stroke according to product size can be adjusted to reduce the mold open time. Far-infrared heating tube, penetrating power, rotation and revolution preform is heated evenly, PLC or electronic regulator individually controlled heating temperature in each group.

Automatic PET Bottle Blow Moulding Machine

Has a unique design of the oven when heated preform closely spaced, blowing bottle spacing is transformed by size, shortening the drying tunnel and reduce energy consumption. Air route design sub-micro blow, blowing high-pressure, low-voltage operation of three parts, to meet the needs of different products blown origins special high pressure air recovery, the high pressure blowing exhaust gas recycling, reduce energy consumption. Divided into manual operation, automatic program, manual installation trial, automatic normal production. Automatic production process all the procedures, product quality, the bottle is not contaminated with low investment, high efficiency, convenient and safe operation and maintenance simple.

Technical Parameter
Item CYA-3 CYA-4 CYA-6 CYA-3-5
Theortical output Pcs/h 3300 4500 6500 1800
Product Volume L 1.5 1.5 1.5 5.0
Max. height mm 360 360 360 360
Max. diameter mm 105 105 105 195
Mould Number of cavities / 3 4 6 3
Mould piate dimension(LxH) mm 430×360 600×360 820×360 820×360
Mould thickness mm 190 190 190 280
Mould opening stroke mm 110 110 110 200
Electrical Power / 220-380V/50-60Hz 220-380V/50-60Hz 220-380V/50-60Hz 220-380V/50-60Hz
Total power KW 18 25 35 30
Heating power KW 15 22 32 27
AIR System Operation pressure Mpa 0.8-1.0 0.8-1.0 0.8-1.0 0.8-1.0
Action Air Consuming m3/min ≥1.6 ≥1.6 ≥1.6 ≥1.6
Blowing Pressure Mpa 2.6-3.0 2.6-3.0 2.6-3.0 2.6-3.0
Blowing Air Consuming m3/min ≥2.4 ≥3.2 ≥4.8 ≥3.2
Machine Main body dimension(LxWxH) m 2.7×1.45×2.0 3.4×1.9×2.0 4.4×1.9×2.0 4.4×1.9×2.0
Main body weight Kg 2000 2600 3200 3200
Pre-heater(LxWxH) m 1.6×0.85×2.2 1.6×0.85×2.2 1.6×0.85×2.2 1.6×0.85×2.2
Pre-heater weight Kg 200 200 200 200
Video Show
Similar Product
Recommended Products
Contact Us

Leave a Reply

Your email address will not be published. Required fields are marked *

Suzhou City Chenyu Packing Machinery Co., Ltd.
ADD : Yanhangtou,Sanxing,Jinfeng Town,Zhangjiagang City,Jiangsu,China
TEL : +86-512-58532188
FAX : +86-512-58532120
MOBILE : 013962288333
Web : www.cyfilling.com
E-mail :[email protected]
Contact us
ADD:Yanhangtou,Sanxing,Jinfeng Town,Zhangjiagang
Tel:+86-0512-58532188
Mobile:+86-13962288333
QQ:2355348788
Fax:+86-0512-58532188
Email:[email protected]