Automatic bottled water production line consists of three parts: bottle washing, filling and sealing.
The bottle washing machine uses multi-channel washing liquid spray to achieve the purpose of washing and disinfecting.
The sealing machine can be automatically sealed to ensure that the caps are aseptically clean. This series of lines can be automatically washed, disinfected, filled, capped, counted and exported. With features such as complete functions, novel design, and high degree of automation, it is a new type of water production line integrating machine, electricity, and gas.
After the conveyor line begins to operate, the empty bucket enters the brush bucket machine under the action of the conveying force. The puller wheel and the main brush of the brush bucket machine are in relative motion. The water is continuously turned, the water pump continuously sprays water, and the bucket is dialed after entering. Under the action of the wheel, the revolution around the main brush starts, and the bucket rotates under the action of the bottom brush, thus completing the omni-directional cleaning of the bucket.
After brushing the barrel, enter the upper barrel conveying line and prepare to enter the water production line. When all the 6 barrels reach the upper barrel position, the cylinder of the blocking barrel extends out, blocking the barrel behind, and pushing the barrel cylinder to push the 6 barrels into the upper barrel. Plate: Top cylinder The cylinder is then topped to 45 degrees so that the bucket slides into the bottle holder.