The disinfectant liquid filling equipment adopts the card bottleneck transmission technology to realize the processes of automatic rinsing, filling and capping, and the degree of automation is high; most of the electrical system parts of the filling machine are made of foreign advanced products and parts in contact with liquid.
The disinfectant liquid filling equipment adopts the card bottleneck transmission technology to realize the processes of automatic rinsing, filling and capping. And the degree of automation is high; Most of the electrical system parts of the filling machine are made of foreign advanced products and parts in contact with liquid. All use high-quality stainless steel materials, with wear-resistant, stable, low failure rate and other characteristics, product quality is at the international advanced level.
This machine is a rotary bottle washer, mainly used for flushing new bottles of beverages, water and other products. The bottle is then sent to a filling machine for filling the product. The PET bottle enters the device by the split star wheel. The bottle is clamped to the bottle mouth by the clamp and the turning mechanism. The bottle mouth is turned down, rinsed with sterile water, drained automatically. And turned over until the bottle mouth is facing upwards. Installed.
The main structure of the equipment is in contact with the flushing medium and the outer protective cover is made of high quality stainless steel; open gear transmission. The new stainless steel clamp has simple structure and convenient adjustment; it has less contact area with the bottle mouth and effectively avoids secondary pollution to the bottle mouth.
The filling section enables the filling of the material into the washed bottle that is sent by the bottle washer.
The filling valve adopts the pressure filling negative pressure type reflow method, the filling is quick and sensitive, and the filling liquid level precision is high. There is no spring in the valve, and the material is not in contact with the spring, which is beneficial to the cleaning inside the valve. In order to ensure the filling process and ensure the filling temperature, the material in the valve is in a micro-reflow state when there is no bottle or shutdown. The filling cylinder adopts a full cylinder method to ensure the pressure in the cylinder is stable.
The capping machine drives the rotary disk to rotate through the reducer. The cover is moved away from the hopper by the centrifugal force. There is a front and back cover separation device at the exit. When the reverse cover passes, the cover automatically falls into the return pipe, and the reverse cover is automatically blown into the hopper by the wind. Only the front cover can smoothly enter the slide. And the cover amount in the hopper is automatically detected by the photoelectric switch to control the cover machine to ensure the best effect of the lower cover.
When the front cover enters the slideway, it can smoothly enter the feed tray. To prevent accidents, an anti-reverse cover dial is placed on the slide rail to ensure that the cover that enters the feed tray is correct. And a pair is also arranged on the slide rail. The photoelectric switch stops the main unit immediately when it detects that there is no cover. In order to effectively remove the bad cover without the anti-theft ring and the cover when cleaning the hopper. There is an active exit directly opposite the hopper outlet to satisfy this function.
|Suitable bottle||Round or square shaped bottle|
|PET Bottle||Bottle Diameter:Ф50～Ф100 Bottle Height:150mm～330mm|
|Suitable Cap Standard||Plastic Screw Cap|
|Water Consumption of Rinsing(Kg/h)||500||600||700||800||1500||1800||2500||3000|