Welcome to Chenyu Filling Machinery! Water Filling Machine | Juice Filling Machine | Carbonated Beverage Filling Machine
Auxiliary Packaging Machinery
  • Semi-Automatic PET Bottle Blow Moulding Machine

    PET bottle blow moulding machine,which is suitable for blowing any shape of PET bottles such as carbonated beverage bottles, water bottles, juice bottles, oil bottles, cosmetic containers,etc. It adopts double crank clamping, clamping strong, flexible movement. The controller uses the PLC control (optional time relay), easy maintenance, low cost, time control can be accurate to 0.01 seconds. The air route design operation and blowing into two parts, to meet the blow, requiring action of different pressures. Far infrared heater using heat frequency rotation, orbital revolution so uniform heating, fast and reliable. Different heating lamp into segments with separate temperature control device to ensure ideal preform heating effect. Heating lamp can be adjusted depending on the direction of the preform. Operating only one person, does not require special training, installation, start simple

    Time:2016-09-08
  • Automatic PET Bottle Blow Moulding Machine

    Automatic blow molding machine for the manufacture of PET bottles as raw carbonated drinks, water bottles, juice bottles, cosmetic bottles and so on. This machine adopts man-machine interface to control all working procedures automatic embryo, automatic blower, automatic out of the bottle, the air cylinder fully installed magnetic sensor switch connected PLC controlling the entire program to detect each movement of the cylinder, place the next action tooling stroke , the trip is not in place under the protection of an automatic action is not working, the alarm, PLC display fault location. Machine movement speed, accurate positioning, smooth operation. Depending on the model required, using double crank to increase cross clamping, clamping power. Clamping stroke according to product size can be adjusted to reduce the mold open time. Far-infrared heating tube, penetrating power, rotation and revolution preform is heated evenly, PLC or electronic regulator individually controlled heating temperature in each group. Has a unique design of the oven when heated preform closely spaced, blowing bottle spacing is transformed by size, shortening the drying tunnel and reduce energy consumption. Air route design sub-micro blow, blowing high-pressure, low-voltage operation of three parts, to meet the needs of different products blown origins special…

    Time:2016-09-08
  • PET Bottle Blow Moulding Machine

    PET bottle blow molding machine for the manufacture of PET bottles as raw carbonated drinks, water bottles, juice bottles, cosmetic bottles and so on. This machine adopts man-machine interface to control all working procedures automatic embryo, automatic blower, automatic out of the bottle, the air cylinder fully installed magnetic sensor switch connected PLC controlling the entire program to detect each movement of the cylinder, place the next action tooling stroke , the trip is not in place under the protection of an automatic action is not working, the alarm, PLC display fault location. Machine movement speed, accurate positioning, smooth operation. Depending on the model required, using double crank to increase cross clamping, clamping power. Clamping stroke according to product size can be adjusted to reduce the mold open time. Far-infrared heating tube, penetrating power, rotation and revolution preform is heated evenly, PLC or electronic regulator individually controlled heating temperature in each group. Has a unique design of the oven when heated preform closely spaced, blowing bottle spacing is transformed by size, shortening the drying tunnel and reduce energy consumption.

    Time:2016-09-08
  • PET Bottle Blow Moulding Machine

    PET bottle blow moulding machine,which is suitable for blowing any shape of PET bottles such as carbonated beverage bottles, water bottles, juice bottles, oil bottles, cosmetic containers,etc. It adopts double crank clamping, clamping strong, flexible movement. The controller uses the PLC control (optional time relay), easy maintenance, low cost, time control can be accurate to 0.01 seconds. The air route design operation and blowing into two parts, to meet the blow, requiring action of different pressures. Far infrared heater using heat frequency rotation, orbital revolution so uniform heating, fast and reliable. Different heating lamp into segments with separate temperature control device to ensure ideal preform heating effect. Heating lamp can be adjusted depending on the direction of the preform. Operating only one person, does not require special training, installation, start simple.

    Time:2016-09-08
  • Turned-Up Bottle Sterilizer

    This kind of sterilizer is to make the angle of bottle overturn to 96°or  110°during the process of transporting bottles,then the beverage uses its high temperature(≥80℃)after filling to sterilize the caps,the sterilizing to request within 30~40 seconds.It adopts impacted stainless steel material and high temperature proof plastic chain board.It has the excellent features of compacted structure,convenient operation,energy saving,which is one of the best sterilizing equipments for the juice and tea hot filling production line.

    Time:2016-09-08
  • Bottle Unscrambler

    It unscrambles the plastic bottles,transfer to conveyor in order with certain direction and feed them into other equipments such as washing machine,or filling machine.It decrease labour intensity and improve productivity effect,also avoid second pollution caused by hand touching the bottles for loading bottle.

    Time:2016-09-08
Contact us
ADD:Yanhangtou,Sanxing,Jinfeng Town,Zhangjiagang
Tel:+86-0512-58532188
Mobile:+86-13962288333
QQ:2355348788
Fax:+86-0512-58532188
Email:tangwei@cyfilling.com